How to increase the production efficiency is meaningful for the mass production industry.Nowadays in the injection molding industry,the injection speed is more and more developed in order to satisfy this requirement.
For the injection molding machines,except high speed injection molding machine with accumulator,now the types such as hybrid injection molding machine,fully electric injection molding machine and so on.The injection speed is raised much to reduced the cycle time.We could add some devices to realize three axis linkage(material charging,mould open and ejection),that could reduce machine cycle time obviously.
For the mould,the cooling system must be very good.And the mould structure is reasonable.During the mass production,we have to connect the cold water to get better cooling.After we get ready for everything,surely we could get short cycle time.For example,for the thinwall mould,if 1s injection,2s cooling,2s material charging,mould open and ejection,surely the cycle time is 5s.And if we could reduce the cooling cycle time from 2s to 1s,we could increase the production efficiency 20%.If the power consuming,labor cost is the same in one day time,the 20% is net profit for our customers.
We could offer you a high speed injection molding line for you with high speed injection mould,hybrid injection molding machine,and good quality additional machines for this injection molding line.Please feel free to contact me if you have any question about the high speed injection molding line.Thanks.
Post by Miss Celina
Email: dkm@dakumar.com